FlashScan®

Put the right tools in your toolbox! FlashScan from EFILive allows you to scan, data log and reprogram your vehicle for maximum performance and outstanding drivability.

FlashScan is the key component of the EFILive solution, integrating the EFILive Scan Tool and EFILive Tuning Tool with the chosen vehicle's data management system including Engine Controllers, Transmission Controllers and Powertrain Controllers.

Team FlashScan with AutoCal, and you instantly have your own custom handheld tuning device to sell to your customers.

FEATURES

Security
  • Prevent unauthorized reading, editing and flashing of custom tune files.
  • Tune files are encrypted with EFILive proprietary routines.
  • Use Locking options to prevent tune files from being read from the ECM/TCM.
Licensing
  • Multi-vehicle licensing.
  • FlashScan V2 with one Tuning Option ships with 2 VIN licenses to tune two supported vehicles. Purchase 2 Tuning Options and FlashScan V2 ships with 4 VIN licenses.
  • FlashScan HD ships with 2 VIN licenses to tune two supported vehicles.
  • Additional VIN licenses (up to 221) can be purchased.
Quick Setup
  • Configure and program all device settings, scan and tune settings, tune files and security in a single process.
  • Save Quick Setup configurations for easy reuse.
  • Email BBX configurations to support remote customers.
BBX
  • Read/Flash FlashScan V2⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent).
  • Store tune & log files to internal memory, or SD card.
  • Read & clear DTC codes.
  • High speed data logging.
  • Display data while logging.
  • Read & program calibration and/or operating system data of engine controller.
Pass-thru
  • PC⇄FlashScan V2⇄Connected Vehicle read/flash between 30 sec and 7 minutes (vehicle dependent).
  • Store tune & log files onto PC.
  • Read and clear DTC codes.
  • High speed data logging.
  • Gauges & charts display in real time.
  • Read & program calibration and/or operating system data of engine controller.
Tools
  • Integrate your own tuning parameters.
  • Search files using key vehicle data (VIN, OS, segment).
  • Customize software settings – Scan & Tune file save templates, displays, units, dashboards.
  • Command Line Interface (CLI) and gang-programming automates processes and programs up to five devices simultaneously.

FLASHSCAN V2

Contents
  • EFILive FlashScan interface
  • OBDII cable (RJ45 to SAE-J1962)
  • PC cable (USB A to B)
  • Serial cable (RJ12 to RS232 9-pin female)
  • 2 x AD-2 external input connectors
Specification
  • Built-in LCD screen
  • Built-in audible alarms
  • Upgradable bootblock and firmware
  • External analog, digital, serial & thermocouple inputs
  • 8MB internal memory, 6MB (approx.) available for tune/log files
  • SD memory card slot. Supports SDSC V1.0, SDSC V1.01, SDHC V2.0 up to 32GB. SD Cards with a capacity of less than 64MB not supported
  • Vehicle Input Voltage - Min 9V, Max 12V
Requirements
  • PC or laptop capable of running Win7 or higher
  • Optical drive
  • USB port
  • Color screen with 1024x768 or greater resolution
  • 200MB of available disk space
Communications Protocol
  • SAE-J1979 CAN protocol
  • SAE-J1850 VPW protocol
Integrates with (not included)
  • K-type thermocouple
  • AutoCal
  • SD Card
  • WO2 Serial Adapter (Null Modem) Male

FLASHSCAN HD

Contents
  • EFILive FlashScan interface
  • OBDII cable (RJ45 to SAE-J1962)
  • Adapter (SAE-J1962 to SAE-J1939)
  • PC cable (USB)
Specification
  • Built-in LCD screen
  • Built-in audible alarms
  • Upgradable bootblock and firmware
  • External analog, digital, serial & thermocouple inputs
  • 8MB internal memory, 6MB (approx.) available for tune/log files
  • SD memory card slot. Supports SDSC V1.0, SDSC V1.01, SDHC V2.0 up to 32GB. SD Cards with a capacity of less than 64MB not supported
  • Vehicle Input Voltage - Min 9V, Max 12V
Requirements
  • PC or laptop capable of running Win7 or higher
  • Optical drive
  • USB port
  • Color screen with 1024x768 or greater resolution
  • 200MB of available disk space
Communications Protocol
  • SAE-J1939 CAN protocol
Integrates with (not included)
  • K-type thermocouple
  • AutoCal HD
  • SD Card
  • Green Adapter (SAE-J1962 to SAE-J1939) to suit most Cummins HD On-Road 2017+ vehicle applications

Downloads

Looking at purchasing FlashScan but unsure if the EFILive software is suited to you? Download the EFILive software and an EFILive User Guide to take a look around. The EFILive software remains in Demo mode when FlashScan is not connected or product registration information is not entered, so download today.

NOTE: FlashScan is required for interaction with the vehicle, and for saving edited tune files.