A FlashScan Device is required (sold separately). AutoCal cannot be used to create, edit or save tune files.
To be able to create tunes for your customers’ AutoCal devices, you must;
- Link the AutoCal to your FlashScan V3, FlashScan V2 or FlashScan HD device; and
- Use the "Save Tune files for AutoCal" when preparing tunes.
Software
- Full access to the EFILive Scan Tool.
- Full access to EFILive tuning parameters, including Custom Operating Systems.
- Integrate your own tuning parameters.
- Command Line Interface (CLI) and gang-programming automates processes and programs up to five devices simultaneously.
Security
- Only tune files created by you can be used with AutoCals linked to your FlashScan.
- Link/Unlink AutoCal remotely to/from your FlashScan without having to return the device.
- Prevent unauthorized reading, editing and flashing of custom tune files.
Licensing
- Multi-vehicle licensing.
- AutoCal VIN slots are configurable. Tuners manage capacity between 1 (default) and 600 VIN slots. (Each VIN slot requires one VIN license).
- Additional VIN licenses (up to 600) can be purchased.
Quick Setup
- Configure and program all device settings, scan and tune settings, tune files and security in a single process.
- Save Quick Setup configurations for easy reuse.
- Email BBX configurations to support remote customers.
Tools
- Import tune files.
- Search files using key vehicle data (VIN, OS, segment, comments).
- Customize software settings – Scan & Tune file save templates, displays, units, dashboards.
AutoCal cannot be used to create, edit or save tune files. FlashScan is required for tune file preparation.
BBX
- Read/Flash AutoCal⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent).
- Store tune & log files to micro SD Card.
- Read & clear DTC codes.
- High speed data logging.
- Display data while logging.
- Read & program calibration and operating system data of engine controller.
- Automatic saving of trace files.
Pass-thru
- PC⇄AutoCal⇄Connected Vehicle read/flash between 30 sec and 7 minutes (vehicle dependent).
- Store tune & log files onto PC.
- Read and clear DTC codes.
- High speed data logging.
- Gauges & charts display in real time.
- Read & program calibration and operating system data of engine controller.
