EFILive is pleased to announce the October 2018 Public Release software is now available. The [Check for Updates] option is now active and will check your current software version against the most recent public release version available on our website.  If a newer version is available you can choose to update your installed software automatically. If the installed software can't be updated automatically (usually because it is too old) you will have an option to download and install the complete installation.

Known Issues:

A list of known issues can be found here:https://forum.efilive.com/showthread.php?28717-Current-Public-Release-(Oct-2018)

 

V8 Software: V8.2.21

Known Issues:

Issue 1 When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.

Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Issue 2 When Black Box Logging PIDs from an ECM and TCM simultaneously and a PID is selected from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), (i.e. RPM) then when the log file is opened in the V8 software for viewing, the TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.

Workaround: None. It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available.

 

Build V8.2.21 Enhancements

  • CMC, CMD and CME Digital Signature removal can now be performed when the ECM is in boot mode

Build V8.2.21 Bug Fixes 

  • Disabled Read for CM871 and CM876 due to not being able to confirm file read out is valid.  Flashing remains active.
  • Calculated PIDs that computed an error (such as divide by zero) for one or more frames would cause all frames to be reset back to zero. Now only the frames where the error exists are set to zero.
  • E81 and E82 *.bin files were not being correctly identified as E81 and E82.

 

FlashScan/AutoCal Boot Block: V2.07.008 (Jul 04, 2018) and

FlashScan/AutoCal Firmware: V2.07.138 (Oct 25, 2018)

Known Issues

  • None

Build 138 Enhancements:

  • Version number synchronization.

 

Build 138 Bug Fixes

  • None.

 

V7 Software: V7.5.25

Build 7.5.25 Calibration Updates:

Cummins Heavy Duty

  • CM2350A - Added support for 3 new operating systems.
  • CM2150 - Added support for 2 new operating systems.

Dodge Cummins

  • CME - Added CSP support for 2017 and 2018 pickups.

GM Gas

  • E80 - added support for new operating system, updates to existing operating systems.
  • E84 - added support for 2019 ECM changes.
  • E78 - added support for operating system 12692706.
  • E83 - added support for operating system 12649878.
  • E84 - added support for operating system 12689584, 12694945
  • E92 - added support for operating system 12688929, updated existing operating systems.

GM Diesel

  • E98 - added DSP support for 2018 2.8L vehicles.

 

Build V7.5.25 Enhancements: 
  • None.

Build V7.5.25 Bug FIxes: 
  • When opening (*.efi) data log files that contain default dashboard names, the matching *.mls (map list) file is now correctly processed, causing the maps listed in the *.mls file to be loaded. Previously the *.mls file was only being processed when opening *.pid files.
  • Data logging would stall if any dashboard maps contained PIDs that were not selected in the "Selected PIDs" list.
  • E81 and E82 *.bin files were not being correctly identified as E81 and E82.

Documentation Updates

  • Cummins 2010-2018 Quick Start.pdf
  • Cummins 6p7L CM2350B CSP5 User Guide.pdf
  • EFILive V8 Reference.pdf
  • Duramax LB7 LLY DSP User Guide.pdf
  • Duramax LBZ LMM DSP User Guide.pdf

Knowledgebase Updates https://support.efilive.com/kb.php

  • None.