FlashScan V2 with GM & DC Tuning

FlashScan V2 with GM and Dodge Cummins Tuning is a scan tool, data logger and calibration programmer for selected GM engine and transmission controllers, in either standalone mode (FlashScan V2 to vehicle connection), or in pass through mode (PC/laptop to FlashScan V2 to vehicle connection).

US$1,299.00
Availability: In stock
SKU
FS2-03

FlashScan V2 with GM & Dodge Cummins Tuning supports a wide selection of GM Gas, GM Diesel and Dodge Cummins engine and transmission controllers. Use the Supported Vehicles database to check for vehicle support.

FlashScan V2 with GM & Dodge Cummins Tuning ships with four VIN licenses to tune four supported engine controllers (ECM or PCM) and four supported transmission controllers (TCM). The ECM/PCM and TCM do not need to be for the same vehicle. Additional VIN Licenses (up to a limit of 221 per FlashScan V2 device) or Unlimited Stream Licenses (for selected controllers) may be purchased.

Security
  • Prevent unauthorized reading, editing and flashing of custom tune files.
  • Tune files are encrypted with EFILive proprietary routines.
  • Use Locking options to prevent tune files from being read from the ECM/TCM.
Licensing
  • Multi-vehicle licensing.
  • FlashScan V2 with both Tuning Options ships with 4 VIN licenses to tune four supported vehicles.
  • Each VIN license supports one engine and one transmission controller. The engine and transmission do not need to be from the same vehicle.
  • Additional VIN licenses (up to 221) can be purchased.
Quick Setup
  • Configure and program all device settings, scan and tune settings, tune files and security in a single process.
  • Save Quick Setup configurations for easy reuse.
  • Email BBX configurations to support remote customers.
BBX
  • Read/Flash FlashScan V2⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent).
  • Store tune & log files to internal memory, or SD card.
  • Read & clear DTC codes.
  • High speed data logging.
  • Display data while logging.
  • Read & program calibration and/or operating system data of engine controller.
Pass-thru
  • PC⇄FlashScan V2⇄Connected Vehicle read/flash between 30 sec and 7 minutes (vehicle dependent).
  • Store tune & log files onto PC.
  • Read and clear DTC codes.
  • High speed data logging.
  • Gauges & charts display in real time.
  • Read & program calibration and/or operating system data of engine controller.
Tools
  • Integrate your own tuning parameters.
  • Search files using key vehicle data (VIN, OS, segment).
  • Customize software settings – Scan & Tune file save templates, displays, units, dashboards.
  • Command Line Interface (CLI) and gang-programming automates processes and programs up to five devices simultaneously.
Contents
  • EFILive FlashScan interface
  • OBDII cable (RJ45 to SAE-J1962)
  • PC cable (USB A to B)
  • Serial cable (RJ12 to RS232 9-pin female)
  • 2 x AD-2 external input connectors
Specification
  • Built-in LCD screen
  • Built-in audible alarms
  • Upgradable bootblock and firmware
  • External analog, digital, serial & thermocouple inputs
  • 8MB internal memory, 6MB (approx.) available for tune/log files
  • SD memory card slot. Supports SDSC V1.0, SDSC V1.01, SDHC V2.0 up to 32GB. SD Cards with a capacity of less than 64MB not supported
  • Vehicle Input Voltage - Min 9V, Max 12V
Requirements
  • PC or laptop capable of running Win7 or higher
  • Optical drive
  • USB port
  • Color screen with 1024x768 or greater resolution
  • 200MB of available disk space
Communications Protocol
  • SAE-J1979 CAN protocol
  • SAE-J1850 VPW protocol
Integrates with (not included)
  • K-type thermocouple
  • AutoCal
  • SD Card
  • WO2 Serial Adapter (Null Modem) Male