FlashScan V2 Scan Only

FlashScan V2 Scan Only is a scan tool, data logger and calibration reader for selected GM and Dodge Cummins engine and transmission controllers, in either standalone mode (FlashScan V2 to vehicle connection), or in pass through mode (PC/laptop to FlashScan V2 to vehicle connection). This product can be upgraded to include calibration flashing.

US$499.00
Availability: In stock
SKU
FS2-SO

FlashScan V2 Scan Only supports a wide range of late model GM and Dodge Cummins controllers. Use the Supported Vehicles database to check for vehicle support.

Package your FlashScan V2 Scan Only with GM Tuning, and/or Dodge Cummins Tuning now and save, or upgrade to one or more Tuning Options later.

Quick Setup
  • Configure and program all device settings and scan settings in a single process.
  • Save Quick Setup configurations for easy reuse.
  • Email BBX configurations to support remote customers.
BBX
  • Read FlashScan V2⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent).
  • Store read & log files to internal memory, or SD card.
  • Read & clear DTC codes.
  • High speed data logging.
  • Display data while logging.
  • Read calibration and/or operating system data.
Pass-thru
  • PC⇄FlashScan V2⇄Connected Vehicle read between 30 sec and 7 minutes (vehicle dependent).
  • Store read & log files onto PC.
  • Read and clear DTC codes.
  • High speed data logging.
  • Gauges & charts display in real time.
  • Read calibration and/or operating system data.
Tools
  • Search files using key vehicle data (VIN, OS, segment).
  • Customize software settings – Scan file save templates, displays, units, dashboards.
Contents
  • EFILive FlashScan interface
  • OBDII cable (RJ45 to SAE-J1962)
  • PC cable (USB A to B)
  • Serial cable (RJ12 to RS232 9-pin female)
  • 2 x AD-2 external input connectors
Specification
  • Built-in LCD screen
  • Built-in audible alarms
  • Upgradable bootblock and firmware
  • External analog, digital, serial & thermocouple inputs
  • 8MB internal memory, 6MB (approx.) available for tune/log files
  • SD memory card slot. Supports SDSC V1.0, SDSC V1.01, SDHC V2.0 up to 32GB. SD Cards with a capacity of less than 64MB not supported
  • Vehicle Input Voltage - Min 9V, Max 12V
Requirements
  • PC or laptop capable of running Win7 or higher
  • Optical drive
  • USB port
  • Color screen with 1024x768 or greater resolution
  • 200MB of available disk space
Communications Protocol
  • SAE-J1979 CAN protocol
  • SAE-J1850 VPW protocol
Integrates with (not included)
  • K-type thermocouple
  • AutoCal
  • SD Card

Upgrade your FlashScan V2 Scan Only to include one or more Tuning Options at any point in time to activate tuning features. Upgrading to the EFILive Tune Tool activates:

Security
  • Prevent unauthorized reading, editing and flashing of custom tune files.
  • Tune files are encrypted with EFILive proprietary routines.
  • Use Locking options to prevent tune files from being read from the ECM/TCM.
Licensing
  • Multi-vehicle licensing.
  • FlashScan V2 with one Tuning Option ships with 2 VIN licenses to tune two supported controllers. Purchase 2 Tuning Options and FlashScan V2 ships with 4 VIN licenses.
  • FlashScan HD ships with 2 VIN licenses to tune two supported controllers.
  • Additional VIN licenses (up to 221) can be purchased.
Quick Setup
  • Configure and program all device settings, scan and tune settings, tune files and security in a single process.
  • Save Quick Setup configurations for easy reuse.
  • Email BBX configurations to support remote customers.
BBX
  • Read/Flash FlashScan V2⇄Connected Vehicle between 30 seconds and 7 mins (vehicle dependent).
  • Store tune & log files to internal memory, or SD card.
  • Read & clear DTC codes.
  • High speed data logging.
  • Display data while logging.
  • Read & program calibration and/or operating system data of engine controller.
Pass-thru
  • PC⇄FlashScan V2⇄Connected Vehicle read/flash between 30 sec and 7 minutes (vehicle dependent).
  • Store tune & log files onto PC.
  • Read and clear DTC codes.
  • High speed data logging.
  • Gauges & charts display in real time.
  • Read & program calibration and/or operating system data of engine controller.
Tools
  • Integrate your own tuning parameters.
  • Search files using key vehicle data (VIN, OS, segment).
  • Customize software settings – Scan & Tune file save templates, displays, units, dashboards.
  • Command Line Interface (CLI) and gang-programming automates processes and programs up to five devices simultaneously.