A new option was added recently (mostly for AutoCal users) to prevent other folders showing up when AutoCal users were trying to select files to be flashed. This option is active by default, which also means folders are hidden by default on FlashScan too.

For sub-folders to be visible/hidden, users can navigate to:

  • FlashScan V2: F4 Options -> F1 Setup -> F1 Edit Settings, then scroll down using the down arrow key and set "BBX Dir" to "Yes" using the left or right arrow key, then press "Ok" to save changes.
  • AutoCal (option is activated for the Advanced Menu Only): AutoCal Options -> Edit Settings, then scroll down using the down arrow key and set "BBX Dir" to "Yes" using the up or down arrow key, then press "Ok" to save changes.

Users can also manage this setting via EFILive V8 Scan and Tune software by connecting their FlashScan V2/AutoCal hardware to their PC, opening the V8 software and navigating to Device settings; either via:

  • [F6: Devices] -> [F7: BBX] and selecting/deselecting the "Display folders when selecting tune files for flashing" option. The selection is saved when the device is programmed, or
  • [F5: BBX] -> [F6: Quick Setup] and selecting Edit AutoCal/FlashScan Settings, selecting the [F7: BBX] tab and selecting/deselecting the "Display folders when selecting tune files for flashing" option. The selection is saved when the device is programmed either in that screen or part of the Quick Setup programming.