EFILive is pleased to announce August 2017 Beta Release 10 is now available. The Check for Updates functions are only active for full public release software.  PLEASE DOWNLOAD THIS UPDATE MANUALLY.

V8 Software: V8.2.5 Build 324

Known Issues:

Issue 1 When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.

Workaround: EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Issue 2 When Black Box Logging PIDs from an ECM and TCM simultaneously and a PID is selected from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), (i.e. RPM) then when the log file is opened in the V8 software for viewing, the TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.

Workaround: None. It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available.

Issue 3 PIDs with text values such as "FUELSYS1" and "FUELSYS2" are not displayed correctly in the V8 scan tool.

Workaround: None. Will be fixed in the next update.

Issue 4 When editing chart properties in the V8 scan tool, clicking in the Y-axis area of a chart to select it for editing has the unintended side effect of resetting that chart's Y-axis min/max values to their defaults.

Workaround: None. Will be fixed in the next update.

Build 323 Enhancements

  • "Minimum" and "Maximum" defined values for user defined and third party PIDs are now used as the default min and max scale values when adding PIDs to the charts. The min/max values are automatically adjusted to compensate for different units selected by the user.
  • Added short cut key <Numeric KeyPad 0> to start/stop data logging in pass-thru logging mode. It is easier to press that key on a laptop keyboard when sitting inside a vehicle, then to press either Ctrl+R/Ctrl+Q or click the Record/Stop buttons.
    Note: if the input focus is currently a text entry field, then pressing <Numeric Keypad 0> will result in a 0 being inserted into the field, it will not start/stop logging. It will only start/stop logging when the input focus is not a text field.

Build 322 Enhancements

  • Added "Capture Screen to Clipboard" option for Charts, Gauges and Maps display in the Scan Tool. Use drop down menu off of the [Save] button or the hotkey Shift+Ctrl+C.
  • The [Check Firmware] option correctly displays the status of the currently connected device if the user disconnects one device and re-connects a different device.
  • Added VIN, Serial Number and Operating System Number as tags for scan and tune filename templates.
  • Fixed scan and tune filename template tag <ctrl> not resolving to the controller type name correctly.
  • Added option to load security settings and remote control options from an existing tune file when setting up security restrictions for individual tune files and BBX quick setup files.
  • Added pass-thru and BBX data logging for Cummins HD controllers CM2250 and CM2250A.
  • Added a command line interface to allow tuners to automate AutoCal programming using batch files. Use the EFILive_CmdLine.exe file and related documentation EFILive Command Line Reference.pdf.
  • Added new user defined PIDs option that allows users to define their own data logging PIDs, including DMA PIDs. For instructions on creating your own user defined PIDs, please review the comments in the *.ini files in the folder \Documents\EFILive\V8\User Defined PIDs.

Build 321 Enhancements

  • Allow searching for partial checkusm values. That allows searching for CVN (Calibration Verification Numbers) for those controllers that embedd the CVN in the checksum value. 

Build 320 Enhancements

  • Multiple scan or tune files can be opened at the same time by selecting multiple files in Windows Explorer and dragging them onto the main V8 window. Note: right clicking in Windows Explorer and selecting Open, does not support opening multiple files, only a single file at a time can be opened that way.
  • Added new tab page [F7: Licenses]->[F5: Convert] to make it easier for AutoCal customers to apply license conversions issued by their tuner.
  • Added new option in EFILive Control Panel [F7: Licenses] tab page to allow tuners to change AutoCal's maximum number of VIN slots for any AutoCal linked to the tuner's FlashScan device.
  • Added new option in EFILive Control Panel [F7: Licenses] tab page to allow tuners to generate a remote code that can be sent to their customers so that the customer can remotely update AutoCal's maximum number of VIN slots for any
  • AutoCal linked to the tuner's FlashScan device.
  • Added "EFILive Explorer" shortcut link to main screen of EFILive Scan and Tune.
  • Added "EFILive Control Panel" shortcut link to main screen of EFILive Scan and Tune.
  • Added option to allow tuners to change the maximum number of VIN slots allowed on their customer's linked AutoCal devices.
  • Added PID FCSF "Fuel Composition Sensor Frequency" for controllers LS1B, E37, E38, E40 and E67

Build 318 Enhancements

  • Added extended descriptions for PIDs with "state encoded data" such as: FUELSYS. Descriptions are now displayed alongside the cryptic codes.

Build 317 Enhancements

  • Added two new DPF PIDs: REGENR and REGENIR.
  • Added search option to allow searching for segment checksums.
  • Optimized the "Search Entire File" to first search all files' meta data to quickly exclude any files that do not match, then and only then are the remaining files searched for other, more detailed criteria.
  • Added a new template sequence option tag <seq0> which will add a sequence number of 1 to 4 digits depending on the magnitude of the number. I.e. the number is not zero padded to a fixed number of digits.
  • Added a new template option to allow the sequence number to include the letters A..Z.
  • For CMD/CME controllers, added a new FAST CAN Mode flash option. The old FAST CAN Mode is now called "Unlimited", a new fast CAN mode has been added called "Fast" which is slightly slower but more robust than Unlimited.


Build 324 Bug Fixes

  • When editing chart properties in the V8 scan tool, clicking in the Y-axis area of a chart to select it for editing has the unintended side effect of resetting that chart's Y-axis min/max values to their defaults.
  • PIDs with text values such as "FUELSYS1" and "FUELSYS2" were not displaying the correct value nor  the correct text descriptions.

Build 323 Bug Fixes

  • Filename extensions are now treated as case-insensitive.
  • <vin> tag in filename templates was not resolving to the file's VIN.

Build 322 Bug Fixes

  • When re-opening the same log file that is already open with no zoom factor, the newly opened log file is not displayed, instead the current log file display remains unchanged. Specifically if a log file was opened, then notes were deleted, then the same log file was re-opened without saving the changes, the notes that were deleted were not being re-displayed until a change in zoom factor was made.
  • Starting a pass-thru data log when not connected to a vehicle controller will not log any data but the software behaved as if logged data existed.
  • Timestamps displayed during pass-thru data monitoring were incorrectly being updated even though no data was being recorded.
  • Fixed serial wide band data not logging correctly in pass-thru logging.

Build 320 Bug Fixes

  • Fixed the segment number meta data stored in VPW based controllers' *.ctz files. Previously the segment numbers were not being stored when reading the controller.
  • Enabled T87A scanning and OBDII info support.
  • Fixed PID RPM24x from reporting a wrong or no value.
  • Fixed pass-thru logging so that frames are only saved when all PIDs have been received. Previously the scan tool was logging frames up to 4x too fast which cause 3 duplicate frames to be logged for every actual frame received.

Build 318 Bug Fixes

  • Renamed the CMD enhanced PID: AAT to AAT_B to resolve name clash with the generic AAT PID. Previously logged CMD data files that included the enhanced AAT PID will not display correctly.
  • Fixed V8 pass-thru data logging not working on VPW based controllers.
  • Fixed Cummins "Fast CAN Mode".
  • Fixed the "Save As..." option not defaulting to the file's original folder.
  • Some custom DMA PIDs were being incorrectly scaled after the MAF re-scaling options were recently added. E.g. for E38 controllers VSS_M and SCALCORVE_M were being incorrectly scaled.

Build 317 Bug Fixes

  • User selected flash options are no longer cleared when loading a new controller that may not support those options.
  • The options now remain set to the user's choice and are silently ignored if not supported on the target controller.
  • Fixed arrow keys not updating current frame when displaying [F3: Data] or [F5: Gauges] tab pages.
  • Fixed Shift+Arrow Keys not selecting chart data.
  • Fixed display issues when changing Gauges and Charts between full screen mode and windowed mode.
  • Fixed AutoCal/FlashScan device setting: "Use EFILive's Fast Can Mode" for CMD/CME controllers. Even when this option was disabled, CMD/CME flashing would still use fast CAN mode.
  • Fixed folder templates problem where new folders were not being created (if required) when using the "Save As" option for Scan and Tune files.
  • Fixed [Copy] option not working in [F3: Tune]->[F3: Calibration] display.

FlashScan/AutoCal Boot Block: V2.07.007 (Feb 07, 2014) and

FlashScan/AutoCal Firmware: V2.07.122 (Aug 23, 2017)

Known Issues

  • When logging DMA PIDs (i.e. PIDs whose names end with “_M” or “_DMA”), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data. EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

Build 121 Enhancements:

  • Added option to display either O2% or EQR when displaying data from the ALM wideband controller.

Build 120 Enhancements:

  • The "Self Tests" option in AutoCal's advanced menu now requires the user to press [Ok] and [Next] simultaneously to activate. That prevents unwanted/accidental activation of the "Self Tests" option - which is destructive to the Data and Config file systems.
  • Added option to display either EQR or O2% for the ALM wideband on FlashScan's "Display WO2" screen. Use the [0] key to toggle the display between EQR and O2%

Build 117 Enhancements:

  • Added remote start/stop data logging capability via the S1 12V input switch.

Build 114 Enhancements:

  • Cal-Flash, Full-Flash and Config-Flash counters were not being updated correctly.
  • Removed the 1.7 lambda (or 25.0 AFR for petrol/gas) upper limit when displaying or logging wideband serial data.
  • Updated the ALM wideband serial interface to report as "warming up" while temperature is reported as being below 500C (932F). Once temp is above 500C the sensor's lambda/AFR value will be displayed.


Build 120 Bug Fixes

  • Fixed ALM wide band display on FlashScan.
  • Fixed read/flash failures on VPW based controllers if/when a serial device (such as a wide band controller) is connected and transmitting serial data to FlashScan.
  • Fixed wide band data logging issue for ALM serial wide band.
  • Fixed problem that caused some GM controller types to be recognized as Cummins controller types which caused flashing to be disallowed with FlashScan devices that were GM only.

Build 119 Bug Fixes

  • Fixed some GM controllers that could not be licensed when flashing using FlashScan in standalone mode or in pass-thru mode from EFILive V8 (AutoCal is not affected, EFILive V7 is not affected).

Build 118 Bug Fixes

  • Fixed PID scaling for MAF, MAP, EQR and O2V when recording freeze frame data in the "Record All Diagnostics" option.
  • Fixed PID values displaying as minimum or default values in freeze frame data if the PID is selected for data logging.

Build 117 Bug Fixes

  • Fixed problem where *.ctz tune files are incorrectly deleted from the FlashScan or AutoCal device after a failed flash followed by a failed read.

 

V7 Software: V7.5.9 Build 334

Known Issues

  • The E92 controller's serial number is not displayed correctly in the V7.5 software. Please use the V8 software to display the E92 controller's serial number.

Build 331 Calibration Updates:

GM Gas:

  • E80 - Support for new OS for 2018 vehicles.
  • E82 - Support for new OS for 2018 vehicles.
  • E39/E39A - enhancements to existing operating systems.
  • E78 - Updates for OS 12647732 to fix checksum issues.

GM Diesel:

  • E98 - support for new OS for 2018 vehicles.
  • E98 - fixed auto-locking problem.

Build 330 Calibration Updates:

GM Gas:

  • E39 - Updates to existing operating systems.
  • E78 - Support for 2018 vehicles using OS 12687343.
  • E82 - Support for OS 12682341.
  • E92 - E92 - Added support for OS 12683365 and 12685939.

GM Diesel:

  • E98 - Added support for OS 55500370

Build 329 Calibration Updates:

GM Gas:

  • E39 - Fixed DTC tables for OS 12666071, 12666135 and 12654753.

Build 328 Calibration Updates:

GM Gas:

  • E37, E38 and E67 - added B1220 and B1221.
  • E78 - Added support for 2 new OS's and updates to existing operating systems.
  • E80 - Added support for 3 new OS's (inc 2018 support) and updates to existing operating systems.
  • E81 - First calibration release for new platform.
  • E82 - Updates to existing operating systems.
  • E84 - Added support for OS12685508 and updates to existing operating systems.
  • E92 - Added support for OS 12679004 and updates to existing operating systems.
  • T76 - Added support for OS 24287053.

GM Diesel:

  • E98 - DSP4 added for 2017 operating systems
  • E98 - Added support for OS 55504430.
Build 324 Calibration Updates:

GM Gas:

  • E78 - Updates to existing operating systems.
  • E80 - Updates to existing operating systems.
  • E84 - added support for OS 12672609.
  • E38 - added support for OS 12673958.
  • T76 - added support for OS 24270721 and 24279785

GM Diesel:

  • E98 - Updated calibrations, added support for OS 55503875 and 55503892

Build 330 Enhancements: 
  • Added VIN, Serial Number and Operating System Number as tags for scan and tune filename templates.
  • Added VIN display when opening Cummins HD tune files.
  • Added "full binary compare" option to compare the complete binary data of each segment when doing tune file comparisons. Useful for detecting tune file changes not made by the EFILive software.
Build 329 Enhancements: 
  •  Added option to edit labels for calibrations that support editable axis labels. Right click on the calibration and select "Edit Row Labels" or "Edit Col Labels".
  • Out of range cell value are now displayed with a black border. The red border used previously was difficult/impossible to see when the cell's background color was also red.
Build 328 Enhancements: 
  • Removed controllers that can't be read using the V7 software from the list of controllers available for uploading (reading). The V8 software must be used to read those controllers instead.
  • Added support for E81 controller.
  • Added "Save tuning file using template..." option.
  • The "Save" option is now enabled after modifying a log file's calculated PID selection.
  • Allow V7 tune editor to enter values larger or smaller than the EFILive pre-defined limits. You may now enter values up to the controller's physical storage limits.
Build 324 Enhancements: 
  • Added two new DPF PIDs: REGENR and REGENIR.
  • Added a "script compatibility mode" option that allows scripts with ambiguous labels to execute without error. This option ignores ambiguous labels and uses the first label in a table's axis that matches the label in the script. This is the way scripts used to execute in older versions of EFILive.
  • Added a new template sequence option tag <seq0> which will add a sequence number of 1 to 4 digits depending on the magnitude of the number. I.e. the number is not zero padded to a fixed number of digits.
  • Added a new template option to allow the sequence number to include the letters A..Z.

Build 334 Bug Fixes

  • The following controller type files may not load correctly in V7.5 with the error "Integer Overflow": E35A (LBZ), E35B (LMM), E80, E81, E82 and E84.
  • The following controller type files may display invalid checksums when opened in V7.5, even though the checksums in the file are correct: CMB, CMC, CDM and CME.
  • Some CME tune files are not displaying some calibration tables correctly.

Build 332 Bug Fixes

  • CMD/CME transmission segment checksums were not being computed correctly and may result in a failed flash.

Build 331 Bug Fixes

  • The beta-8 release was not recognizing previously licensed controllers as licensed.
  • When opening a badly formatted (corrupt) tune file, the attempt to re-save the file as "badbinfile.ctz" is no longer made as that may cause further corruption. When reading a file from a controller, corrupt data will still be saved as "badbinfile.ctz" so that it can be sent to EFILive for analysis.

Build 330 Bug Fixes

  • Fixed "Range Error" when loading tune files that are not supported for editing in V7 but are supported for reading/flashing via the V8 software.
  • Fixed Pro License detection problem

Build 329 Bug Fixes

  • Fixed CMC CSP5 tune files not loading.
  • Calibrations that are outside of EFILive defined ranges are no longer flagged as "out of range" and are no longer automatically modified to fall within the EFILive ranges when loading a tune file.

Build 324 Bug Fixes

  • Bitmasks in user defined calibrations (*.cax files) were not being applied to fields defined as 32 bit.
  • Fixed folder template problem where new folders were not being created (if required) when using the "Save As" option for Scan and Tune files.
  • Fixed installer so that the [Edit]->[Properties]->[Folders] settings are now preserved correctly during a software re-install. Previously those settings were incorrectly reset to defaults during an install.

Documentation Updates

  • EFILive V8 Reference.
  • EFILive AutoCal Info For Tuners.
  • EFILive Command Line Reference.
  • Controller Authorization.

Knowledgebase Updates https://support.efilive.com/kb.php

  • Controller Authorization.
  • License Purchase and Activation Codes FAQ.